FREE SHIPPING OVER €99 · SHIPPING €10.89

OFFERS! UP TO 40% OFF

STYLPRO | Wavelength LED Face Mask

104,50€ 110,00€

STYLPRO Wavelength LED Face Mask is a phototherapy mask with 360 LEDs that emits red, blue, and infrared light to treat wrinkles and imperfections and improve skin texture. It features four adjustable modes and is used in 10-minute, hands-free sessions, thanks to its ergonomic design. Ideal for an advanced skincare routine without leaving home.

INDICATIONS

  • Multi-wavelength phototherapy: red (633 nm) + blue (415 nm) + near-infrared (830 nm).
  • 4 pre-programmed modes: Anti-ageing (red + NIR), Target (blue + NIR), Recovery (mainly NIR), Balance (combined)
  • 360 LEDs with high irradiance (~94.9 mW/cm²) for therapeutic efficiency.
  • 10-minute sessions recommended; daily use suggested by experts.
  • Hands-free design with adjustable straps and silicone pads for eye comfort.
  • USB-C charging; portable and suitable for different skin types (except damaged or extremely photosensitive skin).

STYLPRO | Wavelength LED Face Mask is backordered and will ship as soon as it is back in stock.

Size:
Category: Accessories
Skin type: All Skin Types, Acne-Prone Skin, Oily Skin, Combination Skin, Dry Skin, Sensitive Skin, Normal Skin INFO
Recommended routine INFO
When necessary

INCI

Key ingredients

KEY INGREDIENTS

  • Red LED (633 nm): stimulates fibroblasts, collagen, improves firmness.
  • Blue LED (415 nm): acts on bacteria and improves skin clarity.
  • Near-infrared LED (830 nm): penetrates more deeply, improves microcirculation and tissue repair.
  • High irradiance (~94.9 mW/cm²) and 360 LEDs for full facial coverage.
  • Hands-free mask design: adjustable straps, eye comfort pads, USB-C cable.

Instructions for use

  1. Make sure the device is fully charged using the included USB-C cable.
  2. Cleanse the skin on your face and neck; switch to dry mode (without serum or mask) to ensure light penetration.
  3. Attach the straps to the mask, place the eye pads, and fit it comfortably over your head.
  4. Press and hold the ON/OFF button to turn it on; select the desired mode using the MODE button.
  5. Enjoy a 10-minute session while the mask works. You can relax or engage in a quiet activity.
  6. At the end of the session, press the button again to turn it off or wait for it to shut off automatically. Clean the inside of the device with a disinfectant wipe and store it.

Results

  • Immediately: skin feels rested, with a more even tone and a feeling of comfort after a 10-minute session.
  • In the short term (2-4 weeks): less noticeable pores, smoother texture, and reduced visibility of fine lines.
  • In the medium term (6-8 weeks): improved firmness, greater skin density, and a more youthful, radiant overall appearance.

Indicated for

  • Wavelengths: 633 nm (red), 415 nm (blue), 830 nm (near-infrared).
  • Number of LEDs: 360 total chips (120 per main mode)
  • Irradiance: approximately 94.9 mW/cm² (Anti-ageing mode)
  • Modes: 4 pre-programmed (Anti-ageing, Target, Recovery, Balance)
  • Session time: 10 minutes per use.

Benefits

  • Increased collagen production and improved skin firmness.
  • Visible reduction in fine lines and wrinkles.
  • Improved skin texture and evenness of skin tone.
  • Clarity and reduction of imperfections in acne-prone skin or skin with texture marks.
  • Convenience of use and portability for integration into a home routine.

FAQs

  • What skin type can use it?
    The mask is suitable for most skin types, including mature, combination, or blemish-prone skin. It is not recommended if the skin is irritated, damaged, or extremely sensitive to light.
  • What is the difference between the modes?
    - Anti-ageing: red light + infrared for firmness and texture.
    - Target: blue + infrared for blemish-prone skin. - Recovery: mainly infrared for tissue repair. - - Balance: combination of the three wavelengths for overall treatment.
  • Can it be used over serum or a mask?
    It is not recommended to use over a sheet mask or thick products that interfere with light penetration. It is best to use it on clean, dry skin.
  • How many times a week should it be used?
    The cited expert recommends daily use, although it can be adjusted to 3-5 times depending on tolerance and skin condition.
  • Does it produce heat or discomfort?
    The mask is designed to be comfortable, without generating excessive heat. If you feel discomfort, stop use and consult.

STYLPRO Wavelength LED Face Mask

STYLPRO Wavelength LED Face Mask is a portable phototherapy device that combines three key wavelengths—red 633 nm, blue 415 nm, and near-infrared 830 nm—to provide a state-of-the-art comprehensive facial treatment. Thanks to its 360 LEDs and an irradiance of approximately 94.9 mW/cm², it is capable of penetrating different skin layers, activating mitochondria in fibroblasts, and modulating cellular processes involved in aging, inflammation, and skin texture.
From a biophysical-dermocosmetic point of view, red light (633 nm) increases the production of type I/III collagen, improves dermal density, and reduces the appearance of wrinkles. Blue light (415 nm) acts at the surface level to inhibit bacteria and improve the clarity of skin prone to imperfections. Near-infrared light (830 nm) penetrates more deeply, promoting microcirculation, lymphatic drainage, and tissue repair. 

With four preset modes (Anti-ageing, Target, Recovery, Balance), the user can adapt the session to their specific needs. The hands-free mask design, with adjustable straps and eye-comfort pads, facilitates its home use without the need for continuous manual intervention.

Ultimately, this technical device not only belongs to the field of makeup or conventional cosmetics, but also positions itself as an advanced dermal care tool to optimize firmness, texture, and clarity in just 10 minutes per session.

STYLPRO | Masque facial LED Wavelength - InternationalCosmetic
Stylideas

STYLPRO | Wavelength LED Face Mask

104,50€ 110,00€

STYLPRO Wavelength LED Face Mask

STYLPRO Wavelength LED Face Mask is a portable phototherapy device that combines three key wavelengths—red 633 nm, blue 415 nm, and near-infrared 830 nm—to provide a state-of-the-art comprehensive facial treatment. Thanks to its 360 LEDs and an irradiance of approximately 94.9 mW/cm², it is capable of penetrating different skin layers, activating mitochondria in fibroblasts, and modulating cellular processes involved in aging, inflammation, and skin texture.
From a biophysical-dermocosmetic point of view, red light (633 nm) increases the production of type I/III collagen, improves dermal density, and reduces the appearance of wrinkles. Blue light (415 nm) acts at the surface level to inhibit bacteria and improve the clarity of skin prone to imperfections. Near-infrared light (830 nm) penetrates more deeply, promoting microcirculation, lymphatic drainage, and tissue repair. 

With four preset modes (Anti-ageing, Target, Recovery, Balance), the user can adapt the session to their specific needs. The hands-free mask design, with adjustable straps and eye-comfort pads, facilitates its home use without the need for continuous manual intervention.

Ultimately, this technical device not only belongs to the field of makeup or conventional cosmetics, but also positions itself as an advanced dermal care tool to optimize firmness, texture, and clarity in just 10 minutes per session.

View product